Comparison Table

	Kwangshin	Competitor	Comparison Point		Customer Requirement
1. Compressor
Capacity	1200Nm3/hr at 5.0BarG	1280Sm3/hr at 10BarG	Requirement Spec. is 1200Nm3/hr at 5.0BarG
** Competitor has to note actual capacity as Nm3/hr. Kwangshin is actual capacity and Competitor is Design capacity. Design capacity is 20 % below than actual.
Type	Horizontal	Vertical
Gas Input Temp	20℃	15℃	Design Temp		20℃
Amb. Temp	- 25 ~ 55℃	- 20 ~ 50℃			- 25 ~ 55℃
Motor Power(Kw)	262.5	160	Kwangshin 64% higher than Competitor
Size(Dimension/mm)	3700*2695*2378	2200*2200*1400
Weight(Kg)	14,300	55,000
Type	Heavy Duty	Light Duty
Starter Method	Soft Starter	Y- Delta Starter			Soft Starter
Cooling Type	Air Cooled Type	Water Cooled Type	The client consider additional water cooling system at out of compressor skid and frozen to burst pipe line in winter season.		Air Cooled Type
	(Package Type)	(Cooling system needed)
Apply Zone	Zone 1, 2	Zone 2	Hazardous class		Zone 1, 2
Explosion Proof Type	Flame Proof	Intrinsic Safety			Flame Proof
2. Gas Storage
Volume	3200	4000			3200
Lines	3Line (Cascade Type)	1Line (Buffer Type)	1(one) line is cheaper than 3lines		3 Lines
3. Dispenser
Max Flow Rate(m3/hr)	56.6	18	Competitor flow rate is too low. It is hard to fuel fastly.
No. of Refueling Lines	3Line (Cascade Type)	1Line (Buffer Type)			3 Lines
Dimension(m/n)	1092*407*2124	1000*535*1945
Design Pressure(PSI)	5000	3600	Competitor design pressure is low. It is not apply at station		5000
4. Priority Fill Panel
Type	3Line (Cascade Type)	1Line (Buffer Type)	1(one) line is cheaper than 3lines		3 Lines
5. Others
Competitor doesn't have their own compressor model for this project. Offered compressor is from FORNOVOGAS